Home > Products > Beer Beverage Filling Machine > Beer Filling Machine > MIC 12-1 Beer Filling Machine (1000-2000CPH)
MIC 12-1 Beer Filling Machine (1000-2000CPH)
MIC 12-1 Beer Filling Machine (1000-2000CPH)
MIC 12-1 Beer Filling Machine (1000-2000CPH)
MIC 12-1 Beer Filling Machine (1000-2000CPH)
MIC 12-1 Beer Filling Machine (1000-2000CPH)
Video
  • Introduction
  • Parameters
  • Setup List
  • Client Views


Mic 12-1 beer canning machine adopts isobaric pressure filling system which is applicable for beer, carbonated beverage, soft drink, hard cider, soda water, sparkling water and other canned drinks (Cold filling temperature at 0-4 degrees Celsius)

If you also want to use the same machine to fill non-carbonated drinks is available. Through change the counter pressure filling valves to normal pressure filling valves then it will be suitable for filling non-carbonated beverages such as energy drink, fruit juice, cold brew coffee, vitamin water, herbal tea and so on.

beer canning machine, beer can machine, beer can filling machine, beer filling machine, canning line, beer canning machine for sale, beer canning line


Mic 12-1 beer can filling machine is in the digestion and absorption of advanced foreign and domestic sealing machine on the basis of independent development of the can filling, sealing unit. Filling and seaming part is the overall designed, in order to ensure that both the absolute synchronization and coordination.


It has the characteristics of filling reposefully, high speed, liquid level control, capping reliably, frequency conversion timing, less material loss. It can equip CIP system according to the customers’ request. It is the preferred equipment for the small brewery and medium beverage plant


Are you looking for a beer filling machine that can keep up with your brewery's production demands? Look no further than our high-speed beer can filling machine, which can fill 1000-2000 cans per hour. With its fast and efficient operation, this machine can help you streamline your canning process and increase your production output.
Our beer filling machine is designed to handle a wide range of can sizes and shapes, from standard 12-ounce cans to tallboy cans and slim cans. Its user-friendly controls and minimal downtime for cleaning and maintenance make it easy to operate and maintain. Plus, its high-quality materials are resistant to corrosion and wear and tear, ensuring a long lifespan for your investment.
By investing in our beer filling machine, you can ensure that your beer is packaged efficiently and with consistent quality, meeting the expectations of your customers. Plus, with its high-speed operation, you can increase your production output and keep up with demand, helping your brewery grow and succeed.
Don't let slow and inefficient canning processes hold your brewery back. Invest in our high-speed beer filling machine today and take your production to the next level. Contact us to learn more about how our beer filling machine can benefit your brewery.

Inline can rinser / can washing machine

The inline can rinser is used to clean the empty cans by clean water before filling, we can add this can rinser in the beginning of filling line. The twist cages are customized with your sample cans. As long as the height and diameter of your cans are different, you need to buy the extra set twist cages to change.

Isobaric pressure / counter pressure filling system


“MIC” Isobaric pressuring filling does not create foaming during fill, unless beer is above 40°F. Counter Pressure filling leaves 1.27CM headspace, required by can manufacturers for product expansions and potential warming during distribution. Our machine will not foaming and it can keep low DO in the cans. Counter pressuring filling does not create foaming during filling process. Adopts high precision buffing process and food grade 304 stainless steel liquid tank. It will equipped with CIP connector as customer's demand.

Foaming device before seaming for craft beer


“MIC” Counter pressure can filler foaming with hot water or beer jet after filling to eliminate head space and exposure to atmosphere. In order to prevent the oxygen into the can's top position. Jet foaming is the practice used by high-standard breweries. We have tested with dissolved oxygen meter, our TPO is lower than 50PPB.

Aluminum lid seaming system

The “MIC” system is a mechanism actuated, cam-driven seamer with easily adjustable rollers that allow for precise adjustment to from seams that are within can-maker specifications. Seams are formed in under only a second, faster than any other system in its class. Through two past decade’s technology innovation and optimization, the result is revolutionary.

Mic 12-1 Parameters

Power
 1.1Kw
Filling heads
 12piece
Sealing heads
 1piece
Production capacity

1000-2000CPH based on 330ml

Filling temperature
 0-4 ℃
Filling pressure
 Max 5bar/0.5Mpa
Can diameter range
 Ф40-90MM
Can height
 92-168MM
Dimension

1800*1300*1950mm

Weight 1800Kg

More Model And Speed Click

Model
 MIC 12-1 MIC 18-1 MIC 18-6 MIC 24-6 MIC 32-8
Application Beer,  Carbonated Beverage, Gas Drinks, Cold Coffee, Sparking Water, Cider, Soda Water, Herbal Tea, Non-Carbonated Drinks And So On
Packing Type Aluminum Cans, Metal Cans, Tin Cans, Pet Cans Etc
Speed 1000-2000CPH 1000-2500CPH 3000-6000CPH 4000-8000CPH 6000-10000CPH
Filling Arrange 180ml, 250ml, 330ml, 355ml, 440ml, 500ml, 8oz, 12oz, 16oz, 1L and so on (0.1-1L)
Power 1.1kw 1.5kw 2.5kw 3.5kw 4.2kw
Size 1.8*1.3*1.95 (M) 1.9*1.3*1.95(M) 2.3*1.4*1.9（M） 2.58*1.7*1.8（M） 2.8*1.7*1.95（M)
Weight 1800KG 2100KG 2500KG 3000KG 3800(KG)

Name

Brand

Buttons

Schneider (France)

Touch screen

Siemens (Optional)

AC Contactor

Schneider (France)

PLC

Mitsubishi (Japan) / Siemens (Optional)

Frequency changer

Schneider (France)

Air cylinder

AirTAC (China) / FESTO (Optional)

Solenoid valve

AirTAC (China) / FESTO (Optional)

Relay

Omron (Japan) / Schneider (France)

photoelectric sensor

Autonics (Korea) / Omron (Optional)

Proximity switch

Autonics / Omron (Optional)

Products
Product Catalog
Products