PET Bottle Blowing Machine
PET Bottle Blowing Machine
PET Bottle Blowing Machine
PET Bottle Blowing Machine
PET Bottle Blowing Machine
PET Bottle Blowing Machine
PET Bottle Blowing Machine
Video
  • INTRODUCTION
  • TECHNICAL PARAMETER
  • PRODUCT PICTURE

Semiautomatic bottle blow molding machine


Semiautomatic bottle blow molding machine can produce PET containers including the bottles for kinds of drink , soybean, vinegar, and pesticide (less than 10liters) according to the different bottle shape and diameter.
1. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.

5. The machine is small with low investment, easy and safe to operate.


Automatic blow molding machine


Automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes.
It is widely used to produce the carbonated bottle, mineral water bottle, pesticide bottle, oil bottle, cosmetics bottle etc.

1. Stable performance with advanced PLC.

2. Conveying preforms automatically with conveyor.
3. Strong penetrability and swift distribution of the heater by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared pre-heater.
4. Strong clamping force with high pressure and double crank links to lock the mold.
5. Low cost, high efficiency, easy operation, easy maintenance, with automatic technological process.
6. Ideal effect of the chilling with the chilling system.
7. Easy installation and starting
8. Low rejection rate: less than 0.2 percent.



Semiautomatic bottle blow molding machine

Container


Product material

PET

Volume

100ML-5L

Theoretical output

500-1000PCS/H(base on 0.5L)


Preform length

15mm-400mm

Preform inner diameter

Φ10mm-160mm

Moulding


Max. mould plate Dimension(L x W)

400x460mm

Max. mould thickness

300mm

Clamping force

65KN

Mould opening stroke

280mm

Machine size and weight


Main machine (L x W x H)

175*67*186cm

Main machine weight

600Kg

Heater (L x W x H)

187*63*145cm

Heater weight

250Kg

Power

17.5kw

Automatic blow molding machine

Productivity

Depend on bottle design

4500-5000PCS/H

Product type

Body diameter

≤90mm

Height

≤320mm


Neck diameter

28mm

Mold

Cavity

8cavities

Mold thick

240mm

Main machine power


Electrical source power

380v 3Phase /220v 3Phase  50/60HZ

Rated Power

66kw

Really use power

28kw

Air source


LP air compressor

3.0m3/min 1.0MPa

HP air compressor

6.0m3/min 4.0MPa x 3

Power full Air Dryer

15.0m3/min 4.0MPa

Normal Air Dryer

15.0m3/min 4.0MPa

Air Tank

2.0 m3 4.0MPa

Mold Temperature control

18kw

Low air filter

3.0m3/min 1.0MPa

Cooling water

Cooling water

60L/min

Size

L*W*H

6500*4000*2200mm

Weight

6100kg

Auxiliary equipmentpreform unscrambler

L*W*H

2300*1500*2480mm

Weight

350kg

Resin available

/

PET


Products
Product Catalog
gtag('js', new Date()); gtag('config', 'G-SC6JX6B0LY');