Mic 18-1 carbonated drink can filling machine adopts counter pressure filling system which is applicable for beer, carbonated beverage, soft drink, hard cider, soda water, sparkling water and other canned gas drinks (Cold filling temperature at 0-4 degrees Celsius)
If you also want to use the same machine to fill non-carbonated drinks is available. Through change the counter pressure filling valves to normal pressure filling valves then it will be suitable for filling non-carbonated beverages such as energy drink, fruit juice, cold brew coffee, vitamin water, herbal tea and so on.
Machine features:
1. Mic 18-1 carbonated beverage can filling machine is in the digestion and absorption of advanced foreign and domestic sealing machine on the basis of independent development of the can filling, sealing unit. Filling and seaming part is the overall designed, in order to ensure that both the absolute synchronization and coordination.
2. Isobaric filling system, controlled by pressure, accuracy is +/-1%,liquid level difference is not more than 2mm. (requires steady pressure and temperature at 0-4degrees Celsius).
3. Can seaming machine is qualified for Chinese seaming standard, and no air leakage at all.
4. It has the characteristics of filling reposefully, high speed, liquid level control, capping reliably, frequency conversion timing, less material loss. It can equip CIP system according to the customers’ request. It is the preferred equipment for the small brewery and medium beverage plant.
5. Aluminum can and metal can are both available working on our seaming machine, We use our own technical drawing and own processing machine, to make sure our seaming head quality and always easy to purchase.
6. If Cans stock on conveyor then sensor will inform PLC to stop the Can feeding.
Soda can filling machines are an essential component of the beverage manufacturing industry, responsible for filling cans with carbonated liquid to precise levels of volume and carbonation. These machines have played a crucial role in ensuring that carbonated beverages are packaged efficiently, safely, and with consistent quality.
The process of filling cans with carbonated liquid is complex, and it requires specialized machinery that can handle high volumes of production while maintaining a high level of precision. Soda can filling machines use a range of technologies to ensure that each can is filled to the exact level required, and that the carbonation level is consistent across all cans.
One of the key components of soda can filling machines is the filler head. The filler head is responsible for dispensing the carbonated liquid into the cans, and it must be designed to control the flow of liquid accurately. Depending on the type of machine, there may be multiple filler heads, each with its own set of valves and sensors to monitor the filling process.
Another critical component of soda can filling machines is the seamer. The seamer is responsible for sealing the can after it has been filled, ensuring that it is airtight and leak-proof. The seaming process is also essential in maintaining the carbonation level of the beverage inside the can. The seaming process is automated and requires a high degree of precision to ensure that each can is correctly sealed.
Soda can filling machines must also be designed with hygiene and safety in mind. Beverage manufacturers must comply with strict regulations around food safety, and machines must be designed to minimize the risk of contamination. Some soda can filling machines use ultraviolet light to sterilize cans before filling, while others use a range of cleaning solutions to ensure that the cans are free of contaminants.
Overall, soda can filling machines play a vital role in the production of carbonated beverages. They ensure that the production process is efficient, consistent, and safe, allowing manufacturers to meet consumer demands for carbonated beverages while maintaining high-quality standards
Inline can rinser / can washing machine
The inline can rinser is used to clean the empty cans by clean water before filling, we can add this can rinser in the beginning of filling line. The twist cages are customized with your sample cans. As long as the height and diameter of your cans are different, you need to buy the extra set twist cages to change.
“MIC” Isobaric pressuring filling does not create foaming during fill, unless beer is above 40°F. Counter Pressure filling leaves 1.27CM headspace, required by can manufacturers for product expansions and potential warming during distribution. Our machine will not foaming and it can keep low DO in the cans. Counter pressuring filling does not create foaming during filling process. Adopts high precision buffing process and food grade 304 stainless steel liquid tank. It will equipped with CIP connector as customer's demand.
“MIC” Counter pressure can filler foaming with hot water or beer jet after filling to eliminate head space and exposure to atmosphere. In order to prevent the oxygen into the can's top position. Jet foaming is the practice used by high-standard breweries. We have tested with dissolved oxygen meter, our TPO is lower than 50PPB.
Aluminum lid seaming system
The “MIC” system is a mechanism actuated, cam-driven seamer with easily adjustable rollers that allow for precise adjustment to from seams that are within can-maker specifications. Seams are formed in under only a second, faster than any other system in its class. Through two past decade’s technology innovation and optimization, the result is revolutionary.
Mic 18-1 Parameters
Power |
1.5Kw |
Filling heads |
18piece |
Sealing heads |
1piece |
Production capacity |
1000-2500CPH based on 330ml |
Filling temperature |
0-4 ℃ |
Filling pressure |
Max 5bar/0.5Mpa |
Can diameter range |
Ф40-90MM |
Can height |
92-168MM |
Dimension |
1900*1300*1950mm |
Weight | 2100Kg |
More Model And Speed Click
Model |
MIC 12-1 | MIC 18-1 | MIC 18-6 | MIC 24-6 | MIC 32-8 |
Application | Beer, Carbonated Beverage, Gas Drinks, Cold Coffee, Sparking Water, Cider, Soda Water, Herbal Tea, Non-Carbonated Drinks And So On | ||||
Packing Type |
Aluminum Cans, Metal Cans, Tin Cans, Pet Cans Etc |
||||
Speed | 1000-2000CPH | 1000-2500CPH | 3000-6000CPH | 4000-8000CPH | 6000-10000CPH |
Filling Arrange |
180ml, 250ml, 330ml, 355ml, 440ml, 500ml, 8oz, 12oz, 16oz, 1L and so on (0.1-1L) |
||||
Power | 1.1kw | 1.5kw | 2.5kw | 3.5kw | 4.2kw |
Size | 1.8*1.3*1.95 (M) | 1.9*1.3*1.95(M) | 2.3*1.4*1.9(M) | 2.58*1.7*1.8(M) | 2.8*1.7*1.95(M) |
Weight | 1800KG | 2100KG | 2500KG | 3000KG | 3800(KG) |
Name |
Brand |
Buttons |
Schneider (France) |
Touch screen |
Siemens (Optional) |
AC Contactor |
Schneider (France) |
PLC |
Mitsubishi (Japan) / Siemens (Optional) |
Frequency changer |
Schneider (France) |
Air cylinder |
AirTAC (China) / FESTO (Optional) |
Solenoid valve |
AirTAC (China) / FESTO (Optional) |
Relay |
Omron (Japan) / Schneider (France) |
photoelectric sensor |
Autonics (Korea) / Omron (Optional) |
Proximity switch |
Autonics / Omron (Optional) |