MIC 24-24-6 Glass Bottle Carbonated Beverage Filling Machine is applicable for carbonated beverage filling . (if need hot filling temperature at 85-90 degree)
Adopt products: gas water, carbonated water, co2 water, etc liquid like carbonated beverage.
Machine working principle:
1. The carbonated beverage filling machine height adjustable and crowner heads for different height of bottle. Designed cap hopper and transporter, less cap distortion, simpler structure and easier for clearing.
2. The crowner can be fully decrease the bacterial pollution.
3. Fast change over parts, such as bottle in feed worm, star wheel and guiding board.
4. Programmable controller automatically controls the filling steps, cullet flushing, filling valve opening/closing.
High pressure foaming.
5. This machine use pressure filling, liquid surface positioning. The machine for automatic control.
6. Through the touch screen to operate the machine.
For this production line you might be interested in:
3> Sticker labeling machine
4> Liquid level detective machine
5> Metal element detective machine
6> Nitrogen filling machine
7> CIP cleaning system
8> Pasteurization, inventor and sterilizing tunnel.
9> Glass bottle air washing machine
carbonated beverage filling machines are indispensable in the production of carbonated drinks. Their advanced features and precise functionality ensure the efficient and accurate filling of carbonated beverages while maintaining the desired carbonation levels. By investing in a reliable and high-quality carbonated beverage filling machine, manufacturers can optimize production efficiency, ensure product consistency and quality, and extend the shelf life of their carbonated beverages. These machines are a valuable asset in the competitive beverage industry, enabling manufacturers to meet consumer demand and deliver satisfying carbonated drinks to the market.
Capping Part
Capping part is mainly composed of capping heads, cap loader (separated), cap unscrambler, cap drop rail, pressure regular, cylinder and also we need an air compressor as the auxiliary external equipment.
Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute. The capper is equipped with inlet bottle detection switch.
Filling Part
Filling part is mainly composed of filling barrel, filling valve (low temperature and isobar filling), filling pump, bottle hanging device / bottle pedestals, guide rail, elevating device, liquid indicator, pressure gauge, pressure regulator, etc.
Rotary wheel fully made of stainless steel SUS 304. Filling valves are made of SUS316L. Filling valves are reasonably structured with accurate filling. Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.
Model | MIC-24-24-6 |
Washing heads |
32pcs |
Filling heads |
24pcs |
Capping heads |
8pcs |
Volume |
0.1-1.5L |
Production capacity |
3000-5000bottle/hr base on 1000ml |
Filling method |
Normal pressure |
Power |
2.5kw 380V/50HZ(According to
customer) |
Air pressure |
0.7Mpa |
Gas consumption |
0.8m³/min |
Water consumption for bottle washing |
1.5-2T/H |
Wash bottle water pressure |
0.2~0.25 Mpa |
Weight |
4500kg |
Dimension |
3000×1500×2500mm |
Electrical configuration | |
---|---|
Touch screen | DELTA |
Frequency converter | MITSUBISHI |
PLC | MITSUBISHI |
Contactor, breaker | DELIXI |
Proximity switch | DELIXI |
Photoelectric switch | DELIXI |
Bearing | Harbin |
Relay | OMRON |
Barometer | AirTAC |
Air cylinder | AirTAC |
Solenoid valve | AirTAC |