MIC 18-18-1 It is applicable for glass bottle filling capping machine for whisky, alcohol drinks and spirit. (if need hot filling temperature at 85-90 degree)
Adopt products: whisky ,alcohol drinks, spirit, chivas, liquor, vodka, vinegar, soy sauce etc liquid products.
Beer Filling Machine Monoblock the machine was used for filling beer into glass bottle and seal it by crown cap. The beer filling machine monoblock was combined with glass bottle washing, beer filling and crown capping machine into one body.
The guiding shaft for bottle positioning with bottle support, stable bottle in feed and discharge.
The controlling theory for the high pressure foaming injection system.
For this production line you might be interested in:
Related machines are: Glass bottle filling machine, glass bottle capper, glass bottling companies, bottle filling machine, bottle equiment, bottle filling, bottle filling capping machine, bottle filler, bottle capper, bottle capping machine, crown bottle capper, bottle capping machine price, Whisky filling capping machine, vodka filling capping machine, liquor filling machine, spirit filling machine, glass bottle bottling machine.
The whole machine equipment adopts a closed window.
→We sold one to The Kingdom of Denmark on May 5,2017.
Washing Part
Washing part is mainly composed of washing pump, bottle clamps, water distributor, up turn-plate, guide rail, protection cover, spraying device, defrosting tray, rinse water take and rinse water refluxing tank.
The bottle is turned upside down and centered above a spraying nozzle which directs a stream of rinse water into the bottle. After the draining period the bottle is turned over to an upright position again.
Capping Part
Capping part is mainly composed of capping heads, cap loader (separated), cap unscrambler, cap drop rail, pressure regular, cylinder and also we need an air compressor as the auxiliary external equipment.
Cap distributing chute is equipped with a photocell switch to stop the capper when there is no cap inside the chute. The capper is equipped with inlet bottle detection switch.
Model | MIC-18-18-1 |
---|---|
Filling heads | 50pcs |
Capping heads | 10pcs |
Volume | 0.1-1L |
Production capacity | 12000bottle/hr base on 500ml |
Filling method | Normal pressure |
Power | 1.5kw 380V/50HZ(According to customer) |
Air pressure | 0.7Mpa |
Gas consumption | 0.8m³/min |
Water consumption for bottle washing | 4-6T/H |
Wash bottle water pressure | 0.2~0.25 Mpa |
Weight | 3500kg |
Dimension | 2800×1800×2500mm |
Electrical configuration | |
---|---|
Touch screen | DELTA |
Frequency converter | MITSUBISHI |
PLC | MITSUBISHI |
Contactor, breaker | DELIXI |
Proximity switch | DELIXI |
Photoelectric switch | DELIXI |
Bearing | Harbin |
Relay | OMRON |
Barometer | AirTAC |
Air cylinder | AirTAC |
Solenoid valve | AirTAC |