A small auto aluminum tube filling and sealing machine is mainly used for metal hose filling andsealing.About the seal:：We tested the firmness of the end sealing by stepping on the filled pipe with the foot, only the side of the pipe was broken, and the end sealing was still strong and beautiful.It has been widely used in the fields of pharmacy, cosmetic, food and chemical etc.

This MIC L45 SMALL AUTO ALUMINIUM TUBE FILLING & SEALING MACHINE is a 4 folded sealing filling machine.

It has 16 positions for filling and sealing. Materials such as paste, adhesives, AB glue, epoxy glue, skin cream, hair dye, shoe polish, toothpaste etc., are all applicable.

1. Cam Cylinder- Each filling the tube base will up：
The function is to enable the hair dye cream to be filled to the bottom ofthe tube without contact with air, so thatthe material does not deteriorate

2. The Nitrogen Dosing Filling system：
This function is to prevent the hair dye cream from hardening after being exposed to air, because the product cannot be used.
Nitrogen is charged once before filling, and once after filling,to remove excess air in the tube.
Note:Nitrogengenerators canbe purchased fromusor youcan own them

3. Air-blow cutting system:
The fluidity of the hair dye cream is very poor, and it cannot flow from the filling head to the tube through its own fluidity. Therefore, this function is to help cut offthe hair dye cream when itflows to the tube and make it fall into the tube.

4. Rotary Valve：
Especially for High viscosity products, like silicone sealant, hair dye,etc products, help filling into tube

5. Tube Loader：

A tube loader contains a loader and a tunnel. When tubes are put in the loader, they will be conveyed automatically to the working disk by the tunnel

6. Nitrogen purging：

Before to Nitrogen purging is in order to preventing the glue happen solidification.Remove the air and oxygen in the tube,Prevent the material contact with the air.

7. Spray Silicone oil：

Add this station is in order to preventing the air into tube .So can Extend shelf life of the glue.

Drum press feature：

Hydraulic pressure feeder is a planetary mixer or power dispersing machine equipment, its role is to be produced by the mixer high viscosity glue dispensing or discharge. The equipment consists of a hydraulic system, rack, lifting bracket and control box and other components. Its characteristics are: hydraulic cylinder can be adjusted within the range of pressure levels 0-20 Mpa, Piston rod can stay in any position, And can work continuously under pressure maintaining and Regulators work, Aprons platen in contact with the tank wall within the container (which can carry the vacuum degassing apparatus, the material inside the container can be drained without stagnation. Is supported by a hydraulic crane lifted to the top position, easy to operate as sub-working staff, it has a simple structure, convenient operation.

Thank you for the reading this article,

you can also check for:

→ Application  ←

→ QC Adjustment ←