PET Bottle Blowing Machine on sales - Quality PET Bottle Blowing Machine supplier

PET Bottle Blowing Machine

E-mail: sales8@micmachinery.com
Mobile: 0086-13771181029
Whatsapp: 0086-13771181029
Wechat: 0086-13771181029
Shipment: exporting country
Customer reviews: click on

Video

INTRODUCTION
TECHNICAL PARAMETER
PRODUCT PICTURE

Semiautomatic bottle blow molding machine

Semiautomatic bottle blow molding machine can produce PET containers including the bottles for kinds of drink , soybean, vinegar, and pesticide (less than 10liters) according to the different bottle shape and diameter.
1. Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
2. The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3. The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4. The machine can be operated in the step-by-step mode and the semi-auto mode.

5. The machine is small with low investment, easy and safe to operate.

Automatic blow molding machine

Automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes.
It is widely used to produce the carbonated bottle, mineral water bottle, pesticide bottle, oil bottle, cosmetics bottle etc.

1. Stable performance with advanced PLC.

2. Conveying preforms automatically with conveyor.
3. Strong penetrability and swift distribution of the heater by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared pre-heater.
4. Strong clamping force with high pressure and double crank links to lock the mold.
5. Low cost, high efficiency, easy operation, easy maintenance, with automatic technological process.
6. Ideal effect of the chilling with the chilling system.
7. Easy installation and starting
8. Low rejection rate: less than 0.2 percent.

Semiautomatic bottle blow molding machine
Container	Product material	PET
	Volume	100ML-5L
	Theoretical output	500-1000PCS/H(base on 0.5L)
	Preform length	15mm-400mm
	Preform inner diameter	Φ10mm-160mm
Moulding	Max. mould plate Dimension(L x W)	400x460mm
	Max. mould thickness	300mm
	Clamping force	65KN
	Mould opening stroke	280mm
Machine size and weight	Main machine (L x W x H)	17567186cm
	Main machine weight	600Kg
	Heater (L x W x H)	18763145cm
	Heater weight	250Kg
	Power	17.5kw
Automatic blow molding machine
Productivity	Depend on bottle design	4500-5000PCS/H
Product type	Body diameter	≤90mm
Product type	Height	≤320mm
	Neck diameter	28mm
Mold	Cavity	8cavities
Mold	Mold thick	240mm
Main machine power	Electrical source power	380v 3Phase /220v 3Phase 50/60HZ
	Rated Power	66kw
	Really use power	28kw
Air source	LP air compressor	3.0m3/min 1.0MPa
	HP air compressor	6.0m3/min 4.0MPa x 3
	Power full Air Dryer	15.0m3/min 4.0MPa
	Normal Air Dryer	15.0m3/min 4.0MPa
	Air Tank	2.0 m³ 4.0MPa
	Mold Temperature control	18kw
	Low air filter	3.0m3/min 1.0MPa
Cooling water	Cooling water	60L/min
Size	LWH	650040002200mm
Size	Weight	6100kg
Auxiliary equipment（preform unscrambler）	LWH	230015002480mm
Auxiliary equipment（preform unscrambler）	Weight	350kg
Resin available	/	PET

Products